Dental 1:1 / 4:1 Prophy Polishing Contra Angle Slow Low Speed Handpiece Threaded Screw-in Head,Prophy Handpiece

Your position: Home > Handpieces & Maintenance > Low Speed Handpieces > Prophy Handpiece

Description

Specifications

Model	Ratio
MK-PH1	1:1
MK-PH4	4:1

Desription of 1:1
1:1 Prophy screw type contra angle
Features:
Prophy screw type
Prophy head to fit standard E type contra angle motors
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135℃.
--------------------------------------------------------------------------------------------------------------------------------------------

Desription of 4:1
4:1 Dental Contra Angle Slow Low Speed Handpiece
Inner water system be applicable with E-type air motor 4:1 ratio
Ration Speed: 3500-5000r/min
Noise: <70
Sterilization temperature: 135 ℃
Bur applicable: Φ2.33mm-Φ2.35mm or Φ1.59mm-Φ1.6mm
Used for: Contra angle for Endodontic treatmen